CASTLE PME-901 clogs micro pores of concrete surfaces. Has strong cementing power to concrete with high-solid content. It saves your time. PME-901 is non-toxic and non-flammable. Can be use to all concrete surfaces.
Features and Benefits
• | Clogs Micropores of Concrete Surface |
• | Strong Cementing Power to Concrete |
• | High-Solid Content Saves You Time |
• | Non-Toxic and Non-Flammable |
Coverage
• | 1 gallon of PME 901 = 25 - 35 sqm (single coat only) |
Shelf-Life
• | Opened and stored in original container - 36 months |
• | Sealed - Indefinite |
Suitable For
• | All Concrete Surfaces |
Cleaning
• | Clean all brushes, rollers and trays with clean water after every use |
Health and Safety
• | In case of eye splashes or excessive skin contact, thoroughly flush with water. |
Application Procedure
PME-901 (Primer, Cement and Mortar Intensifier)
Mixture as Primer | :1 gallon of PME-901 mix w/ 150% of water. Stir throughly. Apply by brush or roller. |
Mixture as Mortar Intensifier | : 1kg. (5%) PME 901+ 2.5kg (12.5%) Water + 4kg (21%) Cement + 12kg (61.5%) Standard sand |
• | Clean the area to be waterproof. Removed all traces of water, dirt, protruding materials, and other contaminants. |
• | Areas to receive waterproofing should be dried prior to priming. |
• | Application of PME 901(primer, for concrete application only) as primer, by paint brush or roller brush. Drying time would take 30-40mins., depending on the condition of the surface before applying the 1st coat of PME 202(waterproofing film). |
• | Flood testing after the application of waterproofing. |